Free Coffee Training

More of our customers are taking advantage of our Free training when they buy and collect from us. Why not take the time to pay us a visit, we have most of our machines on display and a demo model fired up ready to try. If you are unsure which model to choose then a visit will prove invaluable as there is no substitute to seeing the machine in reality. Once you have made your decision, which we are happy to guide you through, we will give you free training on your machine before you take it away. We can not promise that you will leave a Barista but at least you will be familiar enough with your coffee machine to start making terrific coffee when you return home with your shiny new machine. We are centrally situated with easy access to the M1 and A14 and only 55 minutes by train from St Pancras London Appointment is essential hope to see you soon
Service centre prices

Single boiler: £300
Heat exchanger: £400
Dual boiler: £450
Coffee grinders from £100

All prices include VAT, plus any standard service parts required. Grinders are domestic from £100, commercial up to £200, and do not include burrs.

Repair assessment £75 first hour, charged by the hour - additional hours £45 per hour. This covers the time spent examining your machine on the bench and is payable whether or not a repair goes ahead. This can be put towards a service if required.

What a full service includes

Every machine follows the same printed checklist, whichever engineer has it on the bench. The sheet travels with your machine and is signed off by the engineer who did the work.

Water system

  • Descale, run through until the water runs clear
  • Inline filter checked and replaced
  • Waterspout filter checked
  • Level probe cleaned or replaced

Group head

  • Full group head rebuild
  • Shower screen replaced
  • Group gasket replaced

Valves and seals

  • Anti-vacuum valve replaced
  • Expansion valve seal
  • Steam wand O-ring and PTFE seals
  • Hot water valve pad seal and shaft O-rings

Testing and sign-off

  • All other function checks
  • Video check completed and logged
  • Engineer sign off, dated and named

Nothing extra happens without your say so. If we find work beyond the standard service we tell you what it is and what it costs, and wait for your authorisation. Both the conversation and your answer go on the job sheet.

Every machine gets a PDI before it comes back

PDI is a Pre-Delivery Inspection: the final check after the work is done and before the machine leaves us. 

  • Bench test. Run and tested to confirm the fault is gone and nothing else has been disturbed.
  • Valet. Cleaned inside and out. Most machines go back looking better than they arrived.
  • Photographed. So you can see its condition before you collect it or before it is boxed.
  • Double boxed. If it is shipping, whether or not it arrived that way.

Filmed at every stage

We film your machine as it arrives and send you the video as confirmation we have it. The work, the bench test, the clean and the packing are all filmed. If a courier damages something in transit, we can show what left here and in what condition.